Introduction


At the end of this article, you will be able to configure a PBX Voicemail object within your call flow on the PBX tab. The article will also assist you with some common uses of the object within your call flow configuration. Should you need any assistance, feel free to contact our support department.

 

Configuring a PBX voicemail to email


PBX Voicemail object is a feature which allows you to prompt a caller to leave a message in the event that no one answers an incoming call. Once logged in on the customer portal click on the PBX tab. Then select voicemail from the toolbox menu on the left, drag and drop it onto the main configuration screen. Next, click on the settings icon.

 

voicemail1.PNG

 

After that, you should enter a name and an email address to forward the messages. Also, it is possible to customise the greeting on the voicemail, you are able to upload a custom greeting recorded previously (clicking on the green button) or record a new greeting (clicking on the red button). Within the advanced options, you can create your message template which will be forwarded to the email address chosen. Finally, don't forget to save and apply the new configuration.

 

voicemail2.PNG

Configuring dial-in Voicemail (to be released NOV 2020)


Traditional dial-in Voicemail boxes can be configured if you prefer this to the Voicemail to Email option.  To use this option, when configuring the Voicemail object in the PBX, click the Mode dropdown box, and select the Classic voicemail option. 

 

An internal number will be automatically assigned to dial into the mailbox (which you can change if required).   You can then enter a optional PIN-code if you wish to protect this voicemail box to only be accessed by users that know the PIN-code.  


mceclip1.png


To access the voicemails, dial the internal number assigned from any internal extension (SIP device).  Then follow the voice prompts, for example if you have set a PIN-code, you will be asked to enter the password before accessing the voicemail box.  

 

To receive notifications of messages waiting (MWI) on a compatible phone you firstly need to add the SIP device to the voicemail object, by clicking the green Add button, then selecting one or more devices to receive the MWI notification.  


mceclip3.png


Then you need to ensure that MWI is enabled on your end device.  For Yealink devices, browse to Account, select the appropriate account (if there is more than one configured on the phone), then click on Advanced.   Set Voice Mail Display to enabled and enter the internal number for the Voicemail box into Voice Mail, this will allow you to also automatically dial-in to the voicemail box using the messages button, or the using the Connect softkey when the MWI notification is showing on your phone.  These settings can also be set via advanced cfg setting if using auto provisioning with the following settings (where x is the appropriate account number);

account.x.display_mwi.enable = 1
voice_mail.number.x = {Internal number of VM Box}


mceclip4.png


You can also access and manage messages from the Voicemail object inside the PBX tab.  Click the Show messages link and you will see the messages in the voicemail box listed.  You can listen by clicking on the play icon while hovering over the message, or using the other options on the right, such as download, mark as listened or remove the message.


mceclip5.png

 

 

PBX voicemail usages

 

This scenario simulates a retail shop with the working hours from Tuesday to Sunday, 11 am to 10 pm, and the owner has decided to divert all calls outside, of standard opening hours to a voicemail to email service. A custom greeting has also been commissioned to alert callers of the opening hours. As displayed below from within the settings tab of the voicemail object, the business owner has uploaded the custom greeting.

 

voicemail4.PNG

 

A time condition object has also been utilised within the call flow to set the opening hours. The final step is to include the out of hours voicemail object and ensure that the configuration has been applied.  

 

voicemail3.PNG

 

Watch this in action

 

The video below will show you a visual representation of the areas covered throughout this knowledge base guide.

 

voicemail.gif